WARNING
Do not program a drain sequence before a cooldown
sequence.
C048
The Cooldown Sequence
Display Mes-
sage
Default
Information
Limits
Temperature
140 °F [60 °C]
The water temperature.
33.8 - 140 °F [1 -
60 °C]
RPM
-
The suggested RPM depends on the machine Type.
Drain Valve
1
Only available on washing machines with both : a normal Open and
normal Closed Drain valve.
1 - 2
On Time
12 seconds
The wash action (motor "On" Time). Gentle wash action : 3 seconds.
(The suggested default values can be adjusted at the Initialization
menu)
1 - 99 seconds
Off Time
3 seconds
The wash action (motor "Off" Time). Gentle wash action : 12 sec-
onds.
(The suggested default values can be adjusted at the Initialization
menu)
1 - 99 seconds
Time
7.0 minutes
The programmed time = time needed to decrease the water tempera-
ture.
Once the programmed temperature has been reached, the next Se-
quence will be started.
(for 0 Minutes the Prewash sequence will be skipped) (programmable
in steps of 0.5 Minutes)
NOTE: If a short time is programmed, the water temperature
will decrease fast.
NOTE: Recommendation! Program 1 minute for each 37.4 °F
[3 °C] temperature drop. Example : For a hot wash of 194 °F
[90 °C] and a Cooldown Sequence of 140 °F [60 °C] a time of
about 86 °F/37.4 °F [30 °C/3 °C] = 10 Minutes should be pro-
grammed for the Cooldown Sequence.
0 - 99.5 minutes
Pause
No
When a signal Pause is programmed, a pause will be introduced at the
end of the Wash Step. This allows the operator to add soap for the next
step. A buzzer signal warns the operator that the cycle has been inter-
rupted.
No / Yes
Table 20
The Rinse Sequence
• Prewash
• Wash
• Cooldown
•
Rinse
• Final Rinse
Programming
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
51
Part No. D1631ENR7
Summary of Contents for IYG065J
Page 2: ......
