The Prewash Sequence
Display Mes-
sage
Default
Information
Limits
Level
Normal Low
The suggested water level depends on the machine Type.
RPM
-
The suggested RPM depends on the machine Type.
Detergents
Menu…
Supply 1, …, 8
0 seconds
Time selection for external liquid soap supplies. You can program up
to 4 supplies at the same time. If you have programmed more then 4
supplies an error message will be generated. Put the time of the sup-
plies back to zero until not more than 4 non-zero time values are re-
maining.
(Liquid soap supplies must be switched on at the configuration Menu)
0 - 99 seconds
On Time
12 seconds
The wash action (motor "On" Time). Gentle wash action : 3 seconds.
(The suggested default values can be adjusted at the Initialization
menu)
1 - 99 seconds
Off Time
3 seconds
The wash action (motor "Off" Time). Gentle wash action : 12 sec-
onds.
(The suggested default values can be adjusted at the Initialization
menu)
1 - 99 seconds
Time
4.0 minutes
The Prewash Sequence Time.
(for 0 Minutes the Prewash sequence will be skipped) (programmable
in steps of 0.5 Minutes)
0 - 99.5 minutes
Pause
No
When a signal Pause is programmed, a pause will be introduced at the
end of the Wash Step. This allows the operator to add soap for the next
step. A buzzer signal warns the operator that the cycle has been inter-
rupted.
No / Yes
Table 18
The Wash Sequence
• Prewash
•
Wash
• Cooldown
• Rinse
• Final Rinse
• Soak
• Spray
• No wash
The Wash Sequence
Display Mes-
sage
Default
Information
Limits
Temperature
140°F [60°C]
The water temperature.
33.8 - 197.6°F [1
- 92°C]
Table 19
continues...
Programming
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
49
Part No. D1631ENR7
Summary of Contents for IYG065J
Page 2: ......
