Alliance Laundry Systems IYG065J Original Instructions Manual Download

Page: 62 / 106

How to Handle Power Interruptions

Refer to Installation/Operation/Maintenance manual.

Special Functions

Service Information

Move into the SERVICE INFORMATION if you want to inspect
the actual water temperature and level. Refer to

How to Get into

the Setup Mode

• At the Service Information you can inspect:

• The water temperature and water level.
• The number of cycles that have been accumulated (service

due).

• The actual wash machine states at the running wash cycle.

• By pressing the ARROW DOWN button you will see all the

menu items.

Program or Coin Selector Counter

1. Move to the SERVICE INFORMATION. Refer to

How to Get

into the Setup Mode

2. Press the navigation arrow DOWN to move into the screen

with counters.

• Vended machines: The coin selector counter is shown.
• OPL machines: The program counter is shown.

Resetting the Counters to Zero:

The service cycle counter can be reset to zero in the Service
Menu / Tools / Resetting the cycle counter. To reset the coin se-
lector counter, press the hidden navigation button RIGHT three
times.

External Liquid Soap Boxes

• If the washing machine is connected with external soap

pumps, a signal from the soap supply reservoir can be con-
nected to the washing machine computer.

• If the Soap box is almost empty, then the diagnostic message

"Err 39 out of soap" will be shown on the display of the Wash
Computer.

• So the operator does not have to check the soap supply reser-

voirs continuously to avoid washing without soap.

Operation Menu

DO NOT COPY or TRANSMIT

Part No. D1631ENR7

Summary of Contents for IYG065J











































































































Search results

Summary of Contents for IYG065J

Reviews:

Related manuals for IYG065J

Brands by name

Popular brands

Alliance Laundry Systems IYG065J, Original Instructions Manual

Search results

Summary of Contents for IYG065J

Reviews:

Related manuals for IYG065J

Brands by name

Popular brands