manualshive.com logo in svg

Allen-Bradley 160-DN2, User Manual, Page: 5 / 116

Share
Download
Allen-Bradley 160-DN2 User Manual Download Page 5

Table of Contents

 Publication 0160-5.18 - June 2003

Preface

Using This Manual

Manual Objectives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P-1
Who Should Use This Manual?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P-1
Product References  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P-1
Conventions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P-1
Firmware Version  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P-1
Related Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P-2
Manual Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P-2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P-3
DeviceNet Compatibility  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P-4
Replacing a 160-DN1 with a 160-DN2  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P-4
Rockwell Automation Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P-4

Chapter 1

Product Overview

Module Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
LEDs and DeviceNet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
DIP Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-2

Chapter 2

Quick Start for 
Experienced Users 

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
Required Tools and Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-2

Chapter 3

Installation and Wiring

Required Tools and Equipment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1
EMC Directive 89/336/EEC Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-2
Low Voltage Directive 73/23/EEC Compliance . . . . . . . . . . . . . . . . . . . . . . . . . .  3-2
Surge Suppression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-2
Common Mode Noise   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-4
Drive Output Disconnect   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-4
Removing Program Keypad Module or Ready/Fault Panel  . . . . . . . . . . . . . . . .  3-5
Understanding Module Configuration Switches  . . . . . . . . . . . . . . . . . . . . . . . . .  3-5
Setting the DeviceNet Node Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-6
Setting the Baud Rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-7

Cable Lengths and Baud Rates  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-7

Installing the Communication Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-8
Wiring the DeviceNet Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-9
Connecting the DeviceNet Drop Line to the Module . . . . . . . . . . . . . . . . . . . . .  3-10
Removing Communication Module From a Drive   . . . . . . . . . . . . . . . . . . . . . .  3-10

Summary of Contents for 160-DN2





















































































































Reviews:

No comments