Allegion Schlage D Series, Manual

Page: 132 / 573

4 • Schlage • B-Series service manual
Introduction
Introduction
This manual contains a complete listing of B-Series deadbolt lock parts and assemblies manufactured by the Schlage Lock
Company. This edition lists components of B-Series locks manufactured after June, 2013. This manual provides exploded
views of each lock chassis and trim assembly with an accompanying chart to identify parts for replacement purposes, along
with lock trim ordering procedures, general cylinder information, and all auxiliary components of the B-Series deadbolt
locks.
Standard Features
Locks are furnished with standard features unless otherwise specified.
B250 Series B500 Series B600/700/800 Series
Certification ANSI/BHMA Certified A156.36-2010,
Grade 2 auxiliary lock.
ANSI A156.36, 2010, Grade 2. Available
UL Listed for 3-hour fire door (except
B571)
With FSIC Interchangeable Core
Cylinders: Grade 2
With SFIC Interchangeable Core
Cylinders: Grade 3
ANSI/BHMA Certified A156.36-2010,
Grade 1 auxiliary lock.
With FSIC Interchangeable Core
Cylinders: Grade 2
With SFIC Interchangeable Core
Cylinders: Grade 3
UL Listed for 3-hour fire door, B800-
Series is UL437 listed.
Latch/Deadbolt 1 1/8” x 2 1/4”, Square corner faceplate, 1”
housing diameter, 9/16” throw deadlatch
1” x 2 1/4”, Square corner faceplate, 1”
housing diameter, 1” throw
1 1/8” x 2 1/4”, Square corner faceplate, 1”
housing diameter, 1” throw
Strike 1 1/8” x 2 3/4”, Square corner, T-strike,
box
1 1/8” x 2 3/4”, Square corner, box 1 1/8” x 2 3/4”, Square corner, box
Backset 2 3/8” Adjustable for 2 3/8” or 2 3/4” 2 3/4”
Cylinder 6-Pin solid brass, keyed 6-pin, S123
keyway, keyed different (KD)
6-Pin solid brass, keyed 6-pin, S123
keyway, keyed different (KD)
6-Pin solid brass, keyed 6-pin, S123
keyway, keyed different (KD)
Door Range 1 1/2” – 1 3/4” standard cylinder, 1 1/2” - 2
1/8” interchangeable core cylinder
1 3/8” – 1 7/8” standard cylinder or
thumbturn only, 1 5/8” - 2”
interchangeable core cylinder
1 5/8” – 2”
Keys Two nickel silver cut keys per lock, 6-pin,
S123 section
Two cut keys per lock, 6-pin, S123
section
Two nickel silver cut keys per lock, 6-pin,
S123 section
Reinforcement
—
Metal dust box reinforcer with three - 3˝
screws
Metal dust box reinforcer with two 3”
screws
Trim Rings 7/16” and 1/8” reinforced with security
inserts
1” reinforced with security insert 7/8”
Changes
Date Change
September 2016 New Document