Allegion Schlage D Series, Manual

Page: 431 / 573

162 • Schlage • L-Series service manual
Additional trim options
Mounting plate for trim one side only
L283-150
Mounting plate and posts for rose trim on one side of door. For lever use with spring cage L283-031, for knob use
with mounting plate L583-321.
DOOR DETAIL
For location of cylinder and/or thumbturn holes, as well as all
other dimensions, see appropriate lock function template.
Measure backset from CL of door edge.
CL
OUTSIDE OF
LH DOOR
INSIDE OF
LH DOOR
DOOR EDGE
3
¹⁄₂
" (89 mm)
Min. Wood
doors only
1
⁹⁄₁₆
" (40 mm)
Min. Wood
doors only
LOCK
FRONT
1
¹⁄₈
" (29 mm)
Min. clearance
NOTE: Prepare door for rose trim on one side of door only.
1.718"
(44 mm)
.11"
3mm
1.76"
45mm
Mounting Plate
Mortise door for proper
fit of mounting plate.
L-Series Installation Instructions
Mounting plate for trim one side
©2007 Schlage Lock Co.
P513-301 Rev. 11/07
ANSI A115.1 1990 Hollow steel door installations
Spacers
Spring cage
(lever applications)
OR
Mounting plate
(knob applications)
L283-029 For 1
C\v
" thick hollow steel doors prepared per ANSI A115.1 1990.
Install two spacers between the spring cage (or knob mounting plate) and lock as chassis shown. Spacers
are required for both the inside and outside escutcheons.
Note: L escutcheon designs are not applicable for ANSI A115.1 door preparations.