Allegion Schlage D Series, Manual

Page: 486 / 573

L9000-Series 180 degree indicator installation instructions – sectional trim
Schlage • L-Series service manual • 217
4
11
INDICATOR TRIM ONLY
Install outside INDICATOR with turn or cylinder
L
THIS STEP FOR FUNCTIONS WITH INSIDE THUMB TURN
ONLY.
11a Adjust the cam spindle length (emergency turn or
cylinder cam only).
Cut the spindle at the appropriate mark
according to door thickness.
For 2
Z\v
” door do not cut the spindle.
11b Install the indicator mounting plate.
Secure the mounting plate with four (4) screws.
Note: Cylinder applications require only two (2) screws.
Indicator
mounting plate
All functions
Exterior
11c Install the indicator slide and cam.
Coin turn only : Place cam on spindle first, then place
indicator slide over cam/spindle assembly.
Indicator
slide
Cam (cylinder or
emergency turn)
Coin turn only
Spindle
11d Connect the cam to the indicator slide. The cam must
engage either the left or right side of the indicator slide
according to door handing.
• Unlock the door.
• Move the indicator slide against the top rim of the
mounting plate (unlocked position).
• Position the cam as shown.
OUTSIDE INDICATOR
Door Hand
Lock Type
Non-deadbolt
functions
RH/RR LH/LR
Deadbolt
functions
LH/LR RH/RR