Allegion Schlage D Series, Manual

Page: 72 / 573

12 • Schlage • Primus service manual
Key bitting specifications
Key bitting specifications
The following specifications are the same for Schlage Classic™ keys, including Primus®
.031"
1.012"
100°
.8558"
.6996"
.5434"
.3872"
.231"
23 S1
1 2 3 4 5 6
MACS = 7
Increment: 0.15"
Progression: Two Step
Blade Width: .343"
Depth Tolerance: + .002" - 0
Spacing Tolerance: ± .001"
Root depths
0 .335" 5 .260"
1 .320" 6 .245"
2 .305" 7 .230"
3 .290" 8 .215"
4 .275" 9
.200"
Cuts are read and written bow to
tip. The patented Primus side
bitting process is done at the
Schlage factory. Key blanks have
side bitting already milled.
Pins and springs
Bottom pins
Size Length Part no.
0 .165" 34-300
1 .180" 34-301
2 .195" 34-302
3 .210" 34-303
4 .225" 34-304
5 .240" 34-305
6 .255" 34-306
7 .270" 34-307
8 .285" 34-308
9 .300" 34-309
Master pins
Size Length Part no.
2 .030" 34-202
3 .045" 34-203
4 .060" 34-204
5 .075" 34-205
6 .090" 34-206
7 .105" 34-207
8 .120" 34-208
9 .135" 34-209
Other pins and springs
Description Part no.
Tumbler Spring C503-113
Finger Pin Spring C603-951
Sidebar C603-950
Sidebar Spring C603-952
Cap Pin C503-116
Cap Pin Spring C503-115
Finger pins
Size Part no.
1 34-001
2 34-002
3 34-003
4 34-004
5 34-005
6 34-006
Top pins
Size Length Part no. Application
1 .235" 34-101 Plug total = 0, 1, 2, 3
2 .200" 34-102 Plug total = 4, 5, 6
3 .165" 34-103 Plug total = 7, 8, 9