When the door is unlocked from outside based upon proper authentication,
the External forced lock will be released.
User Guide
YDG413A
14. External Forced Lock
21. Master Mode
External Forced Lock Setting - User Code
16. 3-minute Lock Out Feature
Releasing External Forced Lock Setting
Palm touch
Enter the
User PIN Code
Enter the
button for 5 Sec.
15. Internal Forced Lock
Step
Press the Open / Close button for
5 seconds. Until you hear 3 beeps.
Release
Press the Registration button or,
Turn the manual thumb turn to
Pressing
buttons together.
If an invalid user code or fingerprint is entered five(5) times in a row,
lock out mode is activated and all buttons on the front body are not activated
for three minutes.
To Release 3-minute Lock Out
Press the open / close button.
Press button.
External Forced Lock Setting - Fingerprint
Master mode is a mode in which only the administrator can set the door lock
and provide access to other users. 100ea user passwords, 100ea fingerprint
and individual registration and deletion of one-time passwords enable efficient
management of visitors.
Scan with registered fingerprint and hold
the fingerprint area until you hear 3 beep sounds.
20. Remote Control Module
Buy the Remote Control Module and
install it to link the Remote Control
Remote Control Module
Install Remote Control Module
1.
Remove batteries
Open the battery cover
in the Back Body
and remove
all batteries
3.
Insert batteries
Insert all the batteries
by checking the ,
connector.
4.
Close battery cover
Make sure the module is
correctly mounted with
the sound Ting-a-ling.
2.
Install Remote
Control Module
Equip the
Remote Control Mudule
to the connector.
18. Emergency Power Supply for Discharged Batteries
Icon
Step
Description
Contact the 9V
Alkaline battery
Touch with palm
or Enter button
Touch with a palm
Enter User PIN Code
Open the emergency cover.
Keep contacting the 9V Alkaline battery onto
the emergency power supply terminal.
Touch the keypad gently with your palm.
Enter each number of User PIN Code.
Touch the keypad gently with your palm or
Enter button to confirm.
1
2
3
4
Continue / Complete
Change
Mode
New
Again
Switch to master mode (from normal mode)
PIN CODE
U
PIN CODE
M
PIN CODE
M
Change
Mode
New
Again
Switch to normal mode (from master mode)
PIN CODE
U
PIN CODE
U
OR
Registr
-ation
New
Again
Master Pin Code Change
PIN CODE
M
PIN CODE
M
PIN CODE
M
Delete
OR
Registr
-ation
User Code
PIN CODE
U
UN
OR
UN
PIN CODE
M
Up to 100EA
Only 1EA
Delete
OR
Registr
-ation
Fingerprint
UN
OR
UN
PIN CODE
M
Up to 100EA
Delete
Registr
-ation
Onetime Code
OR
OR
PIN CODE
M
PIN CODE
M
PIN CODE
O
Only 1EA, Automatically deleted after use
Registr
-ation
Language Change
OR
OR
OR
OR
OR
Delete
Delete all credentials
PIN CODE
M
PIN CODE
M
PIN CODE
M
Registr
-ation
Bluetooth Setting (Yale Access App)
PIN CODE
M
Delete
Registr
-ation
Remote Controller
OR
OR
PIN CODE
M
Up to 5EA
UN
UN
Button
SET
Delete
Registr
-ation
Home Network Controller
OR
OR
PIN CODE
M
roller
Cont
PIN CODE
M
PIN CODE
M
Korean
Chinese
English
Taiwanese
8times
Set up a new device in the app
14 (Registration process)
1
High
Low
Mute
Volume Control
PIN CODE
M
OR
OR
OR
19. Power supply
One-on-one real life size
1.5V(LR6) Alkaline AA Battery
The product uses four 1.5V
Alkaline AA batteries. They may
sustain 1 year if used 10 times a
day.(Users are advised to use
authentic Alkaline batteries.)
ISL-1857-00-017
PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed
without prior notice for performance and quality improvement.
Packaging of this product can be recycled.
※
If compulsory external lock is setup, the door open / close button will not function.
The alarm will go off if one tries to open the door through the manual opening/closing unit.
※
To open the door with the manual opening / closing unit under compulsory external lock setting,
one must completely turn the know within one second. Or else, the door will lock ifself again.
You must replace all 4 batteries in the following cases:
* The Low Battery LED on keypad flickers red.
* When low battery notification message is played.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE
OR RECYCLING PROGRAM.
Fingerprint / PIN Code
User Slot Number should be 2 digits.
like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100".
※
※
Voice guidance function :
The lock provides voice guidance for user and it will be helpful to set up
lock’s features correctly.
※
All registered passwords and other credentials can be deleted at the time of mode change.
※
Please install(register) the network module when you want to use a remote control or home network.
Delete
Registr
-ation
Automatic Lock
PIN CODE
M
OR
OR
•
Do not install the digital door lock in an outdoor environment.
•
Do not attempt to disassemble the digital door lock by your self.
By doing so, you may get an electronic shock
and damage the product.
•
Do not use force with a tool onto the product.
•
Make sure to lock the door tight when you go out.
•
Be careful not to hit the handle as it may cause injuries.
•
Do not use water and any type of solvent to clean the product
such as gasoline or benzene as they can cause damage to
electronic circuit, deterioration and or paint peel-off.
•
It is recommended to change User Code on a regular basis.
•
In manual lock mode, make sure to double check
whether the door is securely locked.
•
When External Forced lock is set and unlock the door,
the alarm will be activated.
•
Do not use rechargeable batteries.
Only alkaline batteries are recommended.
•
Make sure to follow the above instructions to avoid any injuries.
•
It cannot be guaranteed in a special conditions & environment such as
water condensation, seaside.
Do not install the digital door
lock in an outdoor environment.
22. Important notes
Do not attempt to disassemble
the digital door lock by yourself.
Do not spray water directly
or wipe with chemicals such as
benzene, gasoline or alcohol.
Do not use force with a tool
onto the product.
When using, remember that
someone else can see the
password.
Make sure to lock the door tight
when you go out.
23. Safety and Warning
17. Unlocking Door with Fake Code
Palm touch
Palm touch
Enter the user code
and fake code
Enter the fake code
and user code
OR
There is no limitation for
digits of Fake PIN Code.
Part of ASSA ABLOY
