Removing the Hard Drive
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer
.
After working inside your computer, follow the instructions
in
After Working Inside Your Computer
. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
CAUTION: Hard drives are fragile. Exercise care when
handling the hard drive.
CAUTION: To avoid data loss, do not remove the hard drive
while the computer is in sleep or on state.
Prerequisites
1
Remove the
stability foot
.
2
Remove both the left and right side-panels. See “
Removing the Side
Panels
”.
Procedure
1
Lay the chassis on the right side.
2
Disconnect the power cable and data cable from the hard drive.
3
Remove the screw that secures the hard-drive assembly to the chassis.
37
Summary of Contents for Area-51 R2
