After Working Inside Your
Computer
CAUTION: Leaving stray or loose screws inside your
computer may severely damage your computer.
1
Replace all screws and make sure that no stray screws remain inside your
computer.
2
Connect any external devices, peripherals, and cables you removed before
working on your computer.
3
Replace any media cards, discs, and any other part(s) that you removed
before working on your computer.
4
Connect your computer and all attached devices to their electrical outlets.
5
Turn on your computer.
13
Summary of Contents for Area-51 R2
