Replacing the Hard Drive
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer
.
After working inside your computer, follow the instructions
in
After Working Inside Your Computer
. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
CAUTION: Hard drives are fragile. Exercise care when
handling the hard drive.
Procedure
1
Align the screw holes on the hard-drive bracket with the screw holes on
the hard drive.
2
Replace the screws that secures the hard drive to the hard-drive bracket.
3
Place the hard-drive assembly in the chassis.
4
Replace the screws that secure the hard-drive assembly to the chassis.
5
Connect the power cable and data cable to the hard-drive.
NOTE: Repeat step 2 to step 5 to replace any other hard drives
installed in your computer.
Post-requisites
1
Replace both the left and right side-panels. See “
Replacing the Side
Panels
”.
2
Replace the
stability foot
.
40
Summary of Contents for Area-51 R2
