Replacing the Left AlienFX
Side-Panel Connector
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer
.
After working inside your computer, follow the instructions
in
After Working Inside Your Computer
. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Replace the screws that secure the left AlienFX side-panel connector to the
bracket.
2
Replace the screws that secure the left AlienFX side-panel connector to the
chassis.
3
Connect the cable that connects the left AlienFX side-panel connector to
the system board.
Post-requisites
1
Replace both the left and right side-panels. See “
Replacing the Side
Panels
”.
2
Replace the
stability foot
.
53
Summary of Contents for Area-51 R2
