Removing the Battery Case
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer
.
After working inside your computer, follow the instructions
in
After Working Inside Your Computer
. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1
Remove the
stability foot
.
2
Remove the right side-panel. See “
Removing the Side Panels
”.
Procedure
1
Lay the chassis on the right side.
2
Slide and open the battery-compartment door.
33
Summary of Contents for Area-51 R2
