Replacing the Optical Drive
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer
.
After working inside your computer, follow the instructions
in
After Working Inside Your Computer
. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the optical-drive bracket with the screw holes on
the optical drive.
2
Replace the screws that secures the optical drive to the optical-drive
bracket.
3
Align the screw holes on the optical-drive assembly with the screw holes
on the chassis.
4
Replace the screws that secure the optical-drive bay assembly to the
chassis.
5
Plug the power cable and data cable to the optical drive.
Post-requisites
1
Replace both the left and right side-panels. See “
Replacing the Side
Panels
”.
2
Replace the
stability foot
.
44
Summary of Contents for Area-51 R2
