Removing the Full-length
Graphics Cards
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer
.
After working inside your computer, follow the instructions
in
After Working Inside Your Computer
. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1
Remove the
stability foot
.
2
Remove both the left and right side-panels. See “
Removing the Side
Panels
”.
Procedure
1
Lay the computer on the right side.
2
Locate the graphics (PCI-Express x16) connector on the system board. For
more information on the graphics connector, see “
System Board
Components
”.
3
Press and hold the securing tab on the clamp.
75
Summary of Contents for Area-51 R2
