Removing the Right AlienFX
Side-Panel Connector
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer
.
After working inside your computer, follow the instructions
in
After Working Inside Your Computer
. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1
Remove the
stability foot
.
2
Remove both the left and right side-panels. See “
Removing the Side
Panels
”.
Procedure
1
Lay the chassis on the left side.
2
Disconnect the cable that connects the right AlienFX side-panel connector
to the I/O board. See “
I/O Board Components
”.
3
Remove the screw that secures the right AlienFX side-panel connector
assembly to the chassis.
45
Summary of Contents for Area-51 R2
