Removing the Stability Foot
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer
.
After working inside your computer, follow the instructions
in
After Working Inside Your Computer
. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Tilt the computer towards the front until the base is facing up.
2
Remove the screws that secure the stability foot to the computer.
22
Summary of Contents for Area-51 R2
