Alfa Romeo Tonale, Owner'S Handbook Manual

Page: 37 / 296

35
"Lane Change" function
When you want to signal the change of
the driving lane, move the lever until the
first impulse (about half stroke).
The direction indicator on the side
selected will be activated for 3 flashes
and then go out automatically. To turn of
the flashing before the end of the cycle,
move the lever in the opposite direction
until the first click (about half way).
TURNING LIGHT
(where provided)
The function is activated with the main
beam switched on and allows the road
to be better illuminated when turning
or negotiating a bend by switching on
dedicated LEDs.
ANIMATIONS
(where provided)
Depending on the version, with the
ignition device in the STOP position, an
animated sequence of front and rear
lights may can be shown when the doors
of the car are unlocked.
Then they light up fixed. The function
is activated from the instrument panel
display menu or using the Alfa Connect
system (see "Multimedia" section).
Only the direction indicators will light up
when only the tailgate is unlocked.
Activating the alarm or hazard warning
lights will disable the function.
ADAPTIVE LOW BEAM FUNCTION WITH
AFS (Adaptive Frontlight System)
TECHNOLOGY
(where provided)
It is a system that adapts the depth
of the dipped beam, depending on the
following driving conditions:
car speed
windscreen wiper moving
the function is enabled through the
instrument panel display menu
when the dipped beam headlights are
on.
In the case of LED matrix headlamps,
in order to meet type-approval
requirements and to avoid dazzling
oncoming drivers, the Adaptive Low
Beam feature must be disabled if the
driver's seat is on the left-hand side of
the vehicle and driving in countries with
the right-hand lane (and vice versa).
HEADLIGHT ALIGNMENT ADJUSTMENT
(where provided)
Light beam direction
The correct aiming of the headlights is
important for the comfort and safety
of not only the driver but all other road
users. This is also covered by a specific
rule of the highway code.
The headlights must be correctly
aligned to guarantee the best visibility
conditions for all drivers while travelling
with headlights on.
Contact a Alfa Romeo Dealership to have
the headlights checked and adjusted, if
necessary.
Check light beam alignment every time
the load or its distribution changes.
Headlight alignment corrector
(where provided)
It only operates with the ignition device
in the ENGINE position.
41
9650158
Turn the ring (1) fig. 41 to adjust.
Position 0 : one or two people on the
front seats
Position 1 : 4 people
Position 2 : 4 load in luggage
compartment
Position 3 : maximum
permitted load stowed in the boot