Alfa Romeo Tonale, Owner'S Handbook Manual

Page: 27 / 296

25
To storing a seat position:
adjusting the driver's seat and storing
radio stations on the Alfa Connect
system according to the desired
preferences
press and release button (2), then
press the button marked with the
number (1) within five seconds or (3)
When storing a new setting for the
driver's seat and radio, the previous
setting is automatically deleted using the
same button.
Recalling a memorised position is also
possible for about 20 minutes after the
doors are opened and about 20 minute
after the engine is stopped. To recall a
memorised position, press the relevant
button briefly.
NOTE The movement of the seat is
suspended if the ignition device is moved
to the START position following the
recall.
FRONT SEAT ELECTRIC HEATING
(where provided)
With the ignition device in ENGINE
position, press button (1) fig. 24 on the
Alfa Connect system display.
24
9650106
There are 3 heating levels (Minimum,
Medium, Maximum).
The heating level can be automatically
updated to lower levels until the function
is deactivated depending on the time
elapsed since activation and the
temperature reached.
After activating the heating, you need
to wait for a few minutes until warm air
flows into the compartment.
WARNING In order to preserve the
conventional battery, this feature cannot
be activated when the engine is off.
Auto On Comfort (where provided)
The electric heated driver and passenger
seat is switched on automatically to
"maximum heating" whenever the engine
is started and the external temperature
is lower than 4.4°C. This function can be
activated and deactivated using the Alfa
Connect system Menu.
FRONT VENTILATED SEATS
(where provided)
Tans are placed in the seat cushion and
backrest to suck air out of the passenger
compartment and introduce air through
the small holes in the seat cover to keep
the driver and front passenger cool in the
event of high external temperatures. The
fans run at two speeds: high and low.
The front ventilated seats control
buttons are located within the Alfa
Connect system. You can gain access to
the control buttons through the climate
screen or the controls screen.
Press button (2) fig. 24 several times to
select, in sequence: HI (High ventilation),
intermediate ventilation level, LO (Low
ventilation) or ventilation off.
NOTE The engine must be running for the
ventilated seats to operate.
Auto On Comfort (where provided)
If the driver and passenger ventilated
seat function is switched on
automatically whenever the engine is
started and the external temperature is
higher than 27°C. This function can be
activated and deactivated using the Alfa
Connect system Menu.
REAR SEATS
The boot can be partially (1/3 or 2/3) or
totally extended by splitting the rear
seat.