Alfa Romeo Tonale, Owner'S Handbook Manual

Page: 123 / 296

121
Group 3
For children between 22 kg and 36 kg,
there are boosters which allow the seat
belt to be worn correctly.
The fig. 132 shows the correct child
positioning on the rear seat.
Children over 1.50 m in height can wear
seat belts like adults.
132
9650270
WARNING
85) Incorrect fitting of the child restraint
system may result in an inefficient
protection system. In the event of an
accident the child restraint system may
become loose and the child may be injured,
even fatally. When fitting a restraint system
for newborns or children, strictly comply
with the instructions provided by the
Manufacturer.
86) When the child restraint system is not
used, secure it with the seat belt or with
the ISOFIX anchorages, or remove it from
the car. Do not leave it unsecured inside the
passenger compartment. In this way, in the
event of sudden braking or an accident, it
will not cause injuries to the occupants.
87) After installing a child restraint system,
do not move the seat: always remove the
child restraint system before making any
adjustment.
INSTALLING AN ISOFIX CHILD
RESTRAINT SYSTEM
88) 89) 90) 91)
The rear side seats of the car are
equipped with ISOFIX attachments, for
fitting child restraint systems quickly,
simply and safely.
The ISOFIX system lets you install the
ISOFIX child restraint system without
using the car seat belts but connecting
them directly to the car seat with three
anchorages in the car. conventional
child restraint systems can be fitted
alongside ISOFIX child restraint systems
on different seats in the same car.
To install an ISOFIX child restraint
system, attach it to the two metal
anchorings (1) fig. 133 located where the
rear seat cushion meets the backrest,
then fix the upper strap (available
together with the restraint system)
to the dedicated anchoring (2) fig. 134
located at the bottom behind the
backrest.
133
9650191
134
9650192
fig. 135 shows an example of a Universal
ISOFIX child restraint system for weight
group 1.
WARNING The fig. 135 is indicative and
for assembly purposes only. Fit the
child restraint system according to the
instructions, which must be included.