Alfa Romeo Tonale, Owner'S Handbook Manual

Page: 32 / 296

KNOWING YOUR VEHICLE
30
35
9650331
DOOR MIRRORS
26)
The mirrors can be adjusted with the
ignition device in the ENGINE position
and for about 3 minutes after the ignition
device has been turned to the STOP
position.
When one of the front doors is opened
this operation is disabled.
Select the desired mirror using device (1)
fig. 36:
device in position (A): left mirror
selected
device in position (C): right mirror
selected
36
9650149
To adjust the selected mirror, press
button (2) in the four directions shown by
the arrows.
WARNING Once adjustment is complete,
rotate device (1) to position (B) to
prevent accidental movements.
Folding
To fold the mirrors, press button (3)
fig. 36. Press the button again to restore
the mirrors to the driving position.
If button (3) is pressed during door mirror
folding (from closed to open position and
vice versa), their movement direction is
reversed.
The mirrors can be folded or opened
with the ignition device in the ENGINE
position and for about 3 minutes after
the ignition device has been turned to
the STOP position. When one of the
front doors is opened this operation is
disabled.
WARNING The mirrors must always be
open while driving and should never be
folded.
Automatic function activation
Activating the central door locking
system from outside the vehicle
automatically folds the mirrors.
Turning the ignition device to the
ENGINE position automatically returns
the mirrors to the driving position.
If the mirrors were folded using device
(3) fig. 36, they can only be returned
to the driving position using the same
device.
Function activation/deactivation using
the Alfa Connect system
The Alfa Connect system menu can be
used to activate/deactivate the electric
mirror folding function (the default
setting for the function is “Active”).
For more information refer to the
contents of the supplements available
online.
Mirrors realignment operation
In case one of the door mirrors has been
moved manually it may occur that the
mirror itself does not retain its position
in a stable way while driving.
In that case it is necessary to carry out
the following realignment operation: