SAFETY
108
SYSTEM ON/OFF
When the car is started the system is
disabled.
To disengage the system, press the
fig. 116 on the lever on the left steering
wheel twice. If the button is not pressed
twice within 5 seconds, the system will
remain enabled.
116
9650336
Activation conditions
Once switched on, the system becomes
active only if the following conditions are
met:
the driver keeps at least one hand on
the steering wheel
car speed ranges between 60 km/h
and 150 km/h
the lane is delimited at least on one
side
there visibility conditions are suitable
the road is straight or with wide radius
bends
the direction indicator (lane departure)
is not activated in the same lane
departure direction as the vehicle
WARNING The system does not apply
the torque to the steering wheel when a
safety system is activated (brakes, ABS,
ASR system, ESC system, Autonomous
Emergency Braking (AEB) system, etc.).
SYMBOLS AND MESSAGES ON THE
DISPLAY
The Lane Keeping Assist system also
advises the driver when the car changes
lane by showing symbols and messages
on the instrument panel display.
Versions with reconfigurable
multifunction display
When the system is active and the lane
limits have not been detected, the lane
lines are grey and a dedicated icon is
shown in the dedicated top area of the
display.
Exiting a lane with detection of a single
limit
When the system is active and only, for
example, the left lane limit has been
detected, the car icon is shown in the
dedicated area of the display; the system
is ready to provide visual warnings in the
event of unintentional exiting (direction
indicator not activated) of the lane to the
left.
When the system detects that the car
has approached the lane line, the left
line on the display turns yellow and the
car icon shown on the display becomes
yellow.
When the system detects that the car
has approached the lane line and is about
to pass it, the left line on the display
(yellow) flashes and the car icon shown
on the display turns yellow.
The system operates in the same way,
but mirrored, in the event of exiting the
right lane when only the right lane limit
has been detected.
Exiting a lane with detection of both
limits
When the system is active, the lane lines
on the display become white to indicate
the successful detection of the limits.
When both lane limits have been
detected, the car shown in the graphic
icon on the display changes green and the
system is ready.
In accordance with the different
conditions detected, the system can
attract the attention of the driver by
altering the lines that identify the lanes
on the display. In particular, the system
can alter their colour (from white to
yellow and vice versa), and make them
flash. Equally, the system alters the
colour of the car icon shown on the
display.
Summary of Contents for Tonale
