Alfa Romeo Tonale, Owner'S Handbook Manual

Page: 256 / 296

TECHNICAL SPECIFICATIONS
254
MINIMUM GROUND CLEARANCE/TYPICAL ANGLES
243
9650131
Minimum ground clearance / typical angles
Minimum ground
clearance (mm) (1)
Approach angle (2) Departure angle (3) Breakover angle (4)
1.5 Mild Hybrid
175
160 (*)
17.6° 22.5° 17.3°
(*) In the area between the front wheels
NOTE Angles and heights may vary depending on equipment and trim levels.
"Minimum ground clearance" (reference 1)
The clearance value is measured next to the lower edge of the differential. This value also defines those for the "Approach angle" the
"Departure angle" and the "Breakover angle". Dimensions are expressed in mm and refer to the car equipped with its original tyres.
"Approach angle" (reference 2)
The approach angle is determined by the horizontal line of the road surface and by the tangent line passing between the front wheel
and the most projecting low point of the car. The wider the angle, the lower the chance to hit an obstacle with the body or chassis,
climbing a steep slope or overcoming an obstacle.
"Departure angle" (reference 3)
The departure angle is determined by the same lines of the "Approach angle", and refers to the rear part of the car.