Alesis AI-2 Reference Manual Download Page 61

Page: 61 / 92

6.5F Reference Menu

The reference menu is used to select the system reference, code
type and rate and the tape time output, generator modes. The AI-2
internal speed and rate computations are all determined by the
options selected in this menu.

Menu

Submenu

Option

Description

REFERENCE

Input

W/C, Lynx

Word clock in and Lynx frame edge.

W/C, Vid

Word clock in and video frame edge.

W/C, Int

Word clock in and internal frame edge.

Reader

Time code reader input.

Lynx

Micro Lynx/Lynx-2 frame edge.

Ext Vid

External video sync.

Int Var

AI -2 internal variable speed ref,

Varispeed set by VAR menu.

Int Fix

AI -2 internal crystal.

Code:

Code type automatically set to ADAT
tape header code type. In chase, set
to reader type.

30 Hz/30

30 Hz/DF

29.97 Hz/30

NTSC default.

29.97 Hz/DF

25 Hz/25

PAL default.

24 Hz/24

S/Rate:

48.048 K

Nonstandard, 48K + 0.1%.

48.000 K

Default.

47.952 K

Nonstandard, 48K -0.1%.

44.144 K

Nonstandard, 44.1K +0.1%.

44.100 K

Nonstandard.

44.056 K

Nonstandard, 44.1K -0.1%.

Var:

Sets speed when Int Var reference
selected.

000/100.00

ADAT pitch number and equivalent
speed variation %, range -300 to +100.

Gen:

Generator output operation mode.

Play/Wind

Default.

Play

Off

Gen Still:

Generator stationary operation mode.

Default.

Off

VSG

TimeLine internal video sync generator
card (VSG) control.

Select VSG.

Off

Default.

Summary of Contents for AI-2





























































































Search results

Summary of Contents for AI-2

Reviews:

Related manuals for AI-2

Brands by name

Popular brands

Alesis AI-2, Reference Manual

Search results

Summary of Contents for AI-2

Reviews:

Related manuals for AI-2

Brands by name

Popular brands