19
An external digital audio word clock can be connected to the
reference W/C IN connector. The same precautions apply as for
the video editor interface, the word clock and synchronizer system
must both be locked to the same reference signal. For example, if
the synchronizer system is referenced to video sync, then the word
clock must also be referenced to video sync.
–10 dBV ANALOG INPUTS
+4 dBu ANALOG
OPTICAL
DIGITAL
INPUT
DIGITAL
OUTPUT
INPUT
OUTPUT
–10 dBV ANALOG OUTPUTS
SYNC
METER BRIDGE
FOOTSWITCHES
OUT
IN
LOCATE/PLAY
LRC REMOTE
PUNCH
IN/OUT
POWER REQUIREMENTS
90-260 VAC
50-60 Hz
50 WATTS MAX
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
ALESIS ADAT
VIDEO
REFERENCE (OPT)
(EXT WORD
CLOCK)
LYNX-2 OR MICRO LYNX INTERFACE
ALESIS AI-2
Sync In
LYNX-2
TC RDR
In
REFERENCE
W/C IN
RDR IN
VID IN
CONTROL
LYNX-2 / MICRO LYNX
MIDI
OUT
IN
BRC
MIDI
OUT
IN
THRU
GEN OUT
W/C OUT
SYNC OUT
ADAT
POWER
CONFIG
EDITOR
S/N
AI2023A
MICRO LYNX
POWER
VIDEO REF
TIME CODE
RDR 2
RDR 1
OUT
AUX IN
AUX OUT
TRANSPORT 1
TRANSPORT 2
IN
MIDI
OUT
THRU/OUT
I/F
MAC
KEYBOARD
VITC
IN
THRU
VIDEO OUT
RS232/422
SYSTEM TALLY
AES/EBU
O.S. OUT WORD OUT CLOCK IN
AUDIO CLOCK GENERATOR
TRANSPORT 3
RDR 3
COMPUTER
MADE IN USA
S/N
VIDEO
REF (OPT)
TC RDR
In
TC IN
RESHAPE
GEN OUT
PILOT IN
PILOT OUT
AUX
EXT VIDEO
VITC
MAC
RS422
TRANSPORT
MANUFACTURED BY
TimeLine Vista, Inc.
MADE IN USA
ALESIS CORPORATION, LOS ANGELES
CAUTION: TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPTERATIONS.
When the Lynx-2 or Micro Lynx is connected correctly the
CONTROL LED on the front panel of the AI-2 should be illuminated,
to indicate that valid communication is occurring between the units.
If the LED does not light (no communications) or is flashing
(communication taking place, but with errors), then recheck the
cable connections.
