12
2.4E W/C OUT
The W/C OUT connector is a female BNC socket. The word clock
output is a 5V TTL signal. Connect a BNC to BNC cable from this
output to the BRC 48 KHz input. This connector feeds either
external word clock or the AI-2 sample clock generator output
to the BRC.
2.5 ADAT CONNECTION
The AI-2 ADAT connection is used to connect the AI-2 to the first
ADAT machine, Successive ADATs are connected in turn, sync out
to sync in. This connector is not used when a BRC is configured as
part of the system.
2.5A SYNC OUT
The SYNC OUT connector is a 9-pin D type socket. The sync out
connector is used for direct connection to the ADAT machine chain.
Connect a male 9-pin D type cable from this connector to the sync
in connector on the first ADAT machine. This connector supplies
commands, 48 KHz clock and Alesis ADAT proprietary synchro-
nization control information to the ADAT machines.
