Alcatel OmniTouch ACS 7.1.4, Site Preparation Manual

Page: 107 / 150

Miscellaneous PCX parameters My Teamwork and the Alcatel-Lucent PBX
............................................................................................................................................................................................................................................................
8AL90212USAC ed01
November 20, 2008 1 0 - 2 5
............................................................................................................................................................................................................................................................
Miscellaneous PCX parameters
Table 10-6 IP Parameters and Compression Parameters
Typical PCX setup
Table 10-7 PCX Setup
RTP Direct Management/IP/IP Parameters/Review-modify
System Options:
+ RTP Direct
+ RTP Direct
RTP Direct:
Select True or False
+ True
Voice Activity Detection Management/System/Other System
Param./Compression Parameters/Review-modify
System Options:
+ Voice Activity Detection on G711
+ Voice Activity Detection on G711
Voice Activity Detection on G711:
Select True or False
+ True
Translator/External Numbering Plan/DID Numbering Translator
DID Translator: Point incoming line(s) to External
Voice Mail (VM) extension
Classes of Service/Access COS/Review/Modify
COS: Select 31 to make sure calls can flow
between Trunk Groups and from users
to Trunk Groups
Note:
The OmniPCX Enterprise default for a SIP Trunk Group is COS 31 .
Classes of Service/Access COS/(descend Heirarchy)/Public Access COS
Enable VPN and ARS use to avoid failure of external calls.
Allow
31 to access the areas currently allowed for access by most callers.