Alcatel-Lucent OmniTouch, Administration Manual

Page: 93 / 382

To add remote sites System Configuration
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008 2 - 7 3
............................................................................................................................................................................................................................................................
To set up a federation of servers, each server must be “made aware” of the other servers.
You do this by adding remote sites for each server.
Figure 2-38 Add or Edit a Remote Site
To add remote sites
........................................................................................................................................................................................................................
1
Click the
Configuration
tab.
........................................................................................................................................................................................................................
2
Click the
Remote Sites
item.
........................................................................................................................................................................................................................
3
For each remote server, enter the fully qualified domain name of that remote server in the
Hostname
field.
........................................................................................................................................................................................................................
4
Enter the name of the remote stack that the remote server is associated with in the
Stack
Name
field.
Note:
The
Stack Name
must be defined on the “Stack Parameters” page
(
Configuration–>Stacking
).
........................................................................................................................................................................................................................
5
You can check the following:
Use Private Network for communication
This is checked to initiate preferred use of
servers within your local private network (stack)
for calls. Calls that stay within the private
network go out through eth1.