manualshive.com logo in svg

Alcatel-Lucent OmniTouch, Administration Manual

The Alcatel-Lucent OmniTouch Administration Manual is a comprehensive resource for managing and optimizing this innovative product. Available for free download from manualshive.com, this manual provides step-by-step instructions and expert guidance to ensure seamless integration and successful operation of the OmniTouch system.

Share
Download
background image

Data replication

System Configuration

............................................................................................................................................................................................................................................................

8AL90208USAD ed01
November 20, 2008

2 - 8 1

 

............................................................................................................................................................................................................................................................

the server stack using the cluster server name. The browser will then access one machine 
from the list of IP addresses returned by the DNS server. If that machine does not respond, 
the browser will continue to try IP addresses until a machine responds. 

Data replication

Alcatel-Lucent OmniTouch Advanced Communications Servers support automated 
failover within a stack to provide high availability. This is done by designating a Secondary 
server to be a synchronized backup to its respective Primary server. For a thorough 
explanation of Data Replication, see the 

OmniTouch My Teamwork Unified 

Conferencing and Collaboration Application Site Preparation Guide

.

The Data Replication feature applies to pairs of Application Servers (Redundancy Pair) 
within a stack. Before enabling Data Replication, you MUST configure the Redundancy 
Pair as a stack through 

Configuration–>Stacking

 (

see  Stacking

). Replication occurs 

within a stack, not between remote sites.You must have one Primary and one Secondary 
Application Server per stack to take advantage of the Data Replication feature. Under 
normal conditions, users should only be provisioned on the Primary Application Server, 
but may be provisioned on the Secondary in the case where the Primary server is 
unavailable.
Once enabled, replication occurs continuously in near real-time over the stack backplane. 
The information is unencrypted. If you re-configure the stack at any time to disable Data 
Replication, the secondary server’s database should be cleared before it is re-enabled. 
Replication works best if, once enabled, it is left enabled at all times.

Important!

If you add any customization to the Default Organization (for example, 

custom prompts used as the Default prompt set), that customization needs to also be 
be transferred to the secondary. If not, the replication process to the secondary will fail 
due to the missing item. 

Summary of Contents for OmniTouch































































































































































































































































































































































































Reviews:

No comments

Related manuals for OmniTouch

Samsung SCX 4500 - B/W Laser - All-in-One Manual preview
SCX 4500 - B/W Laser - All-in-One
Brand: Samsung Pages: 21
Samsung SCX 4828FN - Laser Multi-Function Printer Manual preview
SCX 4828FN - Laser Multi-Function Printer
Brand: Samsung Pages: 38
Samsung SCX 4725FN - B/W Laser - All-in-One Manual preview
SCX 4725FN - B/W Laser - All-in-One
Brand: Samsung Pages: 33
Davis Instruments GroWeatherLink User Manual preview
GroWeatherLink
Brand: Davis Instruments Pages: 108
Arturia JUPITER-8V 2 User Manual preview
JUPITER-8V 2
Brand: Arturia Pages: 125
ZixCorp PocketScriptTM User Manual preview
PocketScriptTM
Brand: ZixCorp Pages: 44
Netscape Certificate Management System 6.2 Administrator'S Manual preview
Certificate Management System 6.2
Brand: Netscape Pages: 874
Crestron e-control Database Manager User Manual preview
e-control Database Manager
Brand: Crestron Pages: 94
ALK CoPilot CoPilot Live Smartphone User Manual preview
CoPilot CoPilot Live Smartphone
Brand: ALK Pages: 42
Symantec WISE INSTALLATION EXPRESS 7.0 SP2 Getting Started Manual preview
WISE INSTALLATION EXPRESS 7.0 SP2
Brand: Symantec Pages: 50
Sun Microsystems Sun GlassFish EnterpriseServer v3 Prelude Troubleshooting Manual preview
Sun GlassFish EnterpriseServer v3 Prelude
Brand: Sun Microsystems Pages: 48
Sun Microsystems Sun StorEdge Availability Suite 3.2 Troubleshooting Manual preview
Sun StorEdge Availability Suite 3.2
Brand: Sun Microsystems Pages: 52
Sun Microsystems VIRTUALBOX 3.0.0 User Manual preview
VIRTUALBOX 3.0.0
Brand: Sun Microsystems Pages: 259
Yamaha CL3 Installation Manual preview
CL3
Brand: Yamaha Pages: 8
Oracle WebLogic JSR-170 Adapter Supported Configurations preview
WebLogic JSR-170 Adapter
Brand: Oracle Pages: 6
KAPERSKY ANTI-VIRUS 7.0 User Manual preview
ANTI-VIRUS 7.0
Brand: KAPERSKY Pages: 235
iHome iA5 Start Manual preview
iA5
Brand: iHome Pages: 22
Cisco CNS NetFlow Collection Engine Installation And Configuration Manual preview
CNS NetFlow Collection Engine
Brand: Cisco Pages: 36

Brands by name

Popular brands

Load more brands