manualshive.com logo in svg

Alcatel-Lucent OmniTouch, Administration Manual

The Alcatel-Lucent OmniTouch Administration Manual is a comprehensive resource for managing and optimizing this innovative product. Available for free download from manualshive.com, this manual provides step-by-step instructions and expert guidance to ensure seamless integration and successful operation of the OmniTouch system.

Share
Download
background image

To construct document conversion VM

System Configuration

............................................................................................................................................................................................................................................................

8AL90208USAD ed01
November 20, 2008

2 - 1 0 7

 

............................................................................................................................................................................................................................................................

again. You will have to navigate back to the page from 

Configuration–>Advanced Settings–>Construct Document Conversion 
VM

 

to start again.

e. You should see the Windows installation process begin and go through four phases:

i. A black screen where the Windows installation begins.
ii. A blue screen where all files are copied to the virtual machine.
iii. A graphical screen which shows the various steps – this shows a time estimate 

in the lower left indicating how long the Windows installation may take.

iv. When the installation finishes, you may see the virtual machine automatically 

reboot.

f. After the Windows installation completes, a Windows command prompt starts 

running, which loops with repetitive ping statements. Change the focus on your 

client workstation to the Web Administration page window. A message requests 

that you “Insert Office 2007 CD”.

g. Remove the Windows CD from the OmniTouch ACS CD/DVD drive and insert 

the Office CD.

h. Return to your client workstation and click the 

OK

 button in the dialog box in the 

Web Administration page window. This starts the Office installation. The pinging 

should stop within the TightVNC window and the Office setup program will start 

within that window.

Note:

The Web Administration window will indicate the VM Construction is 

complete, and an ordinary Windows page will appear in the TightVNC window.

........................................................................................................................................................................................................................

4

Install VMware tools on the virtual machine.

a. When the virtual machine finishes installing Office, make the TightVNC window 

the active window.

b. Remove the Office CD from the OmniTouch ACS CD drive and return to your 

client workstation.

c. In the TightVNC window on your client workstation, press the 

Alt-Ctrl

 keys to 

release the mouse cursor.

d. In the menu at the top of the VMware window, select 

VM–>Install VMware Tools... 

and select 

Typical 

for the type of install

. 

Continue 

the installation process to completion.

e. Reboot the Windows session, when requested. Do 

NOT

 reboot the ACS server.

........................................................................................................................................................................................................................

5

Skip this step and proceed to Step 6, if installing US English.

Copy a startup file to the virtual machine’s hard drive.

a. From the 

Start

 button, select and open the 

My Computer

 icon.

Summary of Contents for OmniTouch































































































































































































































































































































































































Reviews:

No comments

Related manuals for OmniTouch

Samsung CLX 6210FX - Color Laser - All-in-One Admin Manual preview
CLX 6210FX - Color Laser - All-in-One
Brand: Samsung Pages: 65
Samsung 4116 - SCX B/W Laser Driver Manual preview
4116 - SCX B/W Laser
Brand: Samsung Pages: 16
F-SECURE Mobile Anti-Virus 60 Series User Manual preview
Mobile Anti-Virus 60 Series
Brand: F-SECURE Pages: 90
Brocade Communications Systems VA-40FC Hardware Reference Manual preview
VA-40FC
Brand: Brocade Communications Systems Pages: 60
Adobe PHOTOSHOP CS 2.0 - SCRIPTING GUIDE Manual preview
PHOTOSHOP CS 2.0 - SCRIPTING GUIDE
Brand: Adobe Pages: 91
Aastra MX-ONE 4.2 User Manual preview
MX-ONE 4.2
Brand: Aastra Pages: 46
Sharp REACH User Manual preview
REACH
Brand: Sharp Pages: 16
Sharp AR-P17 Software setupg guide Software Setup Manual preview
AR-P17 Software setupg guide
Brand: Sharp Pages: 22
Sharp Qtopia Desktop Operation Manual preview
Qtopia Desktop
Brand: Sharp Pages: 39
Sharp FO-NS2 Operation Manual preview
FO-NS2
Brand: Sharp Pages: 43
Sharp AR-NB2A Online Manual preview
AR-NB2A
Brand: Sharp Pages: 48
Sharp MXUSX5 - Desk - PC User Manual preview
MXUSX5 - Desk - PC
Brand: Sharp Pages: 91
Sharp e-Copy ShareScan OP 3.0 Configuration Manual preview
e-Copy ShareScan OP 3.0
Brand: Sharp Pages: 144
Sharp PenCell IQ-9B01 Operation Manual preview
PenCell IQ-9B01
Brand: Sharp Pages: 247
VMware CLOUD DIRECTOR 1.0 Using preview
CLOUD DIRECTOR 1.0
Brand: VMware Pages: 3
VMware VmWare ESX Server 2.12 Deployment Deployment Manual preview
VmWare ESX Server 2.12 Deployment
Brand: VMware Pages: 34
VMware VCM 5.3 Manual preview
VCM 5.3
Brand: VMware Pages: 34
Ulead BURN.NOW 4 User Manual preview
BURN.NOW 4
Brand: Ulead Pages: 58

Brands by name

Popular brands

Load more brands