............................................................................................................................................................................................................................................................
To construct Document Conversion VM
My Teamwork Licensing
4 - 1 0
8AL90213USAC ed 01
September 12, 2008
............................................................................................................................................................................................................................................................
Note:
If there are errors, see Step iv below.
iii. A new VMware image should quickly appear – within 30 seconds. A window
reflecting activity on the virtual machine will appear within the new VMware
image.
iv. If you see errors, you may need to perform one of the following corrective
actions and start at step 3.c again.
•
A failure of the grab state
– Cancel the warning dialog box to continue the
installation.
•
Insufficient virtual memory to start the virtual machine
– Cancel the warning
dialog box and click the
Power On
button in the VMware window. This operation
may need to be repeated several times.
•
VMware window enters a loop where the hard disk options page appears and is
repeatedly closed
– Wait for the loop to end – may take several minutes. Close the
VMware window (not TightVNC), and start at step 3.c again. You will have to
navigate back to the page from
Configuration–>Advanced Settings–>Construct
Document Conversion VM
to start again.
e. You should see the Windows installation process begin and go through four phases:
i. A black screen where the Windows installation begins.
ii. A blue screen where all files are copied to the virtual machine.
iii. A graphical screen which shows the various steps – this shows a time estimate
in the lower left indicating how long the Windows installation may take.
iv. When the installation finishes, you will see the virtual machine automatically
reboot.
f. After the Windows installation completes, a Windows command prompt starts
running, which loops with repetitive ping statements. Change the focus on your
client workstation to the Web Administration page window. A message requests
that you: “Insert Office 2007 CD”.
g. Remove the Windows CD from the OmniTouch ACS server CD/DVD drive and
insert the Office CD.
h. Return to your client workstation and click the
OK
button in the dialog box in the
Web Administration page window. This starts the Office installation. The pinging
should stop within the TightVNC window and the Office setup program will start
in the command line DOS window.
Note:
The Web Administration interface will indicate the VM Construction is
complete, and an ordinary Windows page will appear in the TightVNC window.
