Alcatel-Lucent OmniTouch My Teamwork, Installation Manual

Page: 25 / 134

Using a Static IP Address Installation Instructions
............................................................................................................................................................................................................................................................
8AL90213USAC ed 01
September 12, 2008 3 - 1 1
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
2
The main menu for the server console will appear. Using the up/down arrow keys, scroll to
the
Network Configuration
menu choice, and select
OK
by pressing the
Enter
key.
1
Figure 3-14 Serial Administrator Console Main Menu
Note:
Alcatel-Lucent strongly recommends that you use a static IP address. If you
respond
Yes
to using DHCP, proceed to section “Using DHCP” .
........................................................................................................................................................................................................................
3
On the next screen ( Use DHCP ), respond
No
and proceed to section “Using a Static IP
Address” .
Using a Static IP Address
On the next screens, enter your TCP/IP parameters.
a. Enter a valid hostname (for example,
y o u r s e r v e r 1
) and select
OK
.
b. Next, enter a valid domain name with extension (for example,
y o u r c o m p a n y . c o m
) and select OK .
c. Enter the IP address (for example,
1 9 2 . 1 6 8 . 1 0 . 1 4 0
) and select
OK
.
d. Enter the netmask (for example,
2 5 5 . 2 5 5 . 2 5 5 . 0
) and select
OK
.
e. Enter the server’s default gateway and select
OK
.
f. Enter your Name server (DNS) and select
OK
.
g. Enter an IP address for the primary NTP server (if different from the default) and
select
OK
.
1 The “+” indicates that more menu items are available by scrolling the display using the up and down arrow
keys. See Appendix E in the OmniTouch ACS Administration Guide for a full explanation of the serial
console application.