To connect to the server from a browser on another
computer
Installation Instructions
............................................................................................................................................................................................................................................................
8AL90213USAC ed 01
September 12, 2008
3 - 1 5
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
5
To continue configuring the server, choose the
Configuration
item from the menu near
the top of the screen. A menu of Configuration items appears on the left.
The server is very configurable; however, only a subset of the available configuration is
required for basic installation. Before attempting to bring up Alcatel-Lucent’s ACS
OmniTouch applications (for example, My Teamwork), please visit the following
Configuration screens (order not important):
Note:
Clicking
Save
for
TCP/IP Settings
and
System Options
is required for a new
installation whether or not changes are made to the screen.
........................................................................................................................................................
E
N D
O
F
S
T E P S
TCP/IP Settings
The settings you configured in the Console will be carried over to this
screen, which also offers additional configuration parameters. Verify
and click
Save
.
System Options
Enter required email addresses. Alarm and alert reporting is set up
here. Verify and click
Save
.
SIP Proxies
If you are using VoIP and must register with a local gateway or PBX in
order to make telephone calls.
PSTN Trunk
Settings
If you are using PSTN.
Edit DAS Rules
(under
Advanced
Settings
)
Set up call routing and dial plan requirements.
