Alcatel-Lucent OmniPCX Office, Installation Manual

Page: 45 / 230

3.4.16.2 Call accounting over IP
This license is required for printing on the fly or for using external accounting applications.
Output data will be provided in a simple XML format interface.
This license must be opened for OHL needs.
3.4.16.3 Local calls (from R8.1)
Specific license for each country
3.4.17 Languages
The number of languages defines the maximum of language used. It is possible to install more
languages (for example 4) but if the number of languages defined in the license is 2, only the 2
first languages will be proposed on sets.
3.4.18 Pay Per User (PPU)
This license indicates that Pay-Per-User option is used.
In this mode, OPEN state has a limit date. At the end of the validity period (checked with PPU
Ending Date value contained in the license key), the system goes into PPU TEMPORARY
STATE for a maximum of 30 days.
At the end of this period, if the PPU Ending Date is still not valid, the system goes into
DEFAULT STATE.
The 30 days period is not the same as the “normal” TEMPORARY STATE. When a new
license key with a valid PPU Ending Date is uploaded, the PPU temporary state counter will
reset and can be used with the default value (30 days) for the next time (in “normal” temporary
state, the counter is never reset). Some Historical alarms are generated one month before the
PPU ending date and when entering to PPU temporary state.
3.4.18.1 PPU Ending Date
This field is only relevant when Pay-Per-User option is activated. It represents the end of the
validity period of the license key. After this date, license has expired and after a temporary
period, system goes to default state.
It is important to notice that, PPU mode (and the validity date) manages the control of all the
licensed services. There is no possibility to unitary close or open a single service.
If the PPU Ending date contains a null value, the license is considered as infinite. In this
particular case, there are no validity date checks.
3.4.18.2 Users number
This field is only relevant if Pay-per User option is used. This value is not used or controlled by
the system. The number of devices is only controlled with the physical device counters (Analog
sets, Mobile set, TSC-IP sets …).
This licenses is only used in the system to display, the number of users contained in the
license, in OMC license screen.
3.4.19 ACD
&% '
3-15