Alcatel-Lucent OmniPCX Office, Installation Manual

Page: 43 / 230

2 access on CPU III main, 16 access on CoCPU)
3.4.12 Lan telephony
In the license, two counters are defined:
- The number of TSC/IP and number of PIMphony IP: Their processing is the same as for
other sets.
- The number of allowed NOE/IP are included into the TSC/IP counters.
3.4.13 VoIP Gateway
3.4.13.1 Number of VoIP channels (from R8.0)
From R 8.0 the pricing of VoIP channels is not based on hardware purchase, but on VoIP
channel licenses purchase.
Note:
To get a number of VoIP channels belonging to the range [17-48], an Armada daughter board is
necessary.
The VoIP channels are available as well for trunks as for subscribers. The number of VoIP
channels available for subscribers can be deduced with the formula:
number of VoIP channels for subscribers = number of VoIP channels – number of VoIP
channels for trunks
When the system starts, the number of available VoIP channels is indicated in OMC
In the VoIP parameters window -> General index , under the label Number of
VoIP-subscriber channels, because all the VoIP channels are allocated to subscribers and
none are allocated to the VoIP trunks.
If the number of VoIP trunks are increased (assuming that the key contains provisions for VoIP
trunks), the number of VoIP channels for subscribers decreases correspondingly. Thus, the
addition of Number of VoIP-subscriber channels and Number of VoIP-trunk channels is the
number of VoIP channels paid for by the customer.
3.4.13.2 Number of VoIP trunks channels
By default, the system starts with 0 trunk.
The number of trunks can be configured by OMC, in VoIP parameters window, index
General, with the label Number of VoIP-trunk channels.
The license gives the maximum number of VoIP trunks, which, from R8.0, cannot be greater
than the number of VoIP channels purchased.
3.4.14 Supplementary information
Supplementary information defines if the VoIP is running on the main CPU or on an application
board (not in R8.0).Voice mail and Automated attendant
Three values allow limiting Voice mail and Automated Attendant features.
- The Number of ports.
They are common to voice mail and automated attendant. In the default state, two ports
are created. They are in the attendant default group and in the first hunting group.
&% '
3-13