91
Audio Tracks
You can load up to four insert effects to each audio track. You can do this in Main Mode and the Channel Mixer.
To load an audio track insert effect in Main Mode
:
1.
When the
Audio
tab is selected (in the lower-left corner), use the
Track
field to select the audio track.
2.
If the channel strip is not already shown, tap the small
eye icon
below the
Project
field to show it.
3.
Tap the
waveform icon
at the top of the channel strip. The channel strip will now show settings for the current
audio track.
4.
Tap the area under
Inserts
, and then use the screen that appears to load or edit effects.
To load an audio track insert effect in the Channel Mixer
:
1.
Use the
Mixer
field in the upper-left corner to select
Audio Tracks
.
2.
In the touchscreen, tap the
pad
that corresponds to the desired audio track.
3.
Tap the area under
Inserts
, and then use the screen that appears to load or edit effects. Alternatively, tap the
Insert
tab at the bottom of the screen (tap it multiple times to select a different insert slot), and then double-tap the desired
pad
on the screen. You could also use the
data dial
or
–
/
+
buttons to select an effect immediately.
Summary of Contents for MPC Touch
Page 1: ...User Guide English Manual Version 2 0 8...
Page 322: ......
