259
Tap the
program automation button
to change the program’s automation. Tapping it will cycle through its three
states:
When
off
, the program will ignore automation data. If you have already recorded or entered
automation, tapping this will switch between
Read
(
R
) and
Write
(
W
) only, but you can
override this and turn it off by pressing and holding
Shift
while tapping the button.
Important
: If you have already recorded automation and turn it off, the track will still use the
effect and its parameter values at the point where you turned it off.
When set to
Read
(
R
), the program will read automation data but will not record any additional
automation over it. (Think of this as a protective feature to prevent accidental changes to your
automation while recording.)
When set to
Write
(
W
), the program can record automation. (If you have any Q-Link knobs
assigned to automatable parameters, make sure not to touch any accidentally while you are
recording.)
Tip
: You can quickly set all programs and audio tracks to the same automation by tapping the
global automation button in the upper-right corner of the screen. See
General Features
>
Automation
to learn about this.
Adjust the
pan knob
or
level slider
to change the panning or level of the program.
Summary of Contents for MPC Touch
Page 1: ...User Guide English Manual Version 2 0 8...
Page 322: ......
