267
Track Mute
This is useful if you want to hear a sequence without a particular track (e.g., muting your keyboard track to focus on
the bass) or if you want to isolate specific sounds or combinations of sounds that are separated by track.
Tip
: This function is similar to, but more convenient than, muting tracks one at a time in the Track View.
To mute tracks in this mode
:
1.
If the
Track Mute
tab in the lower-left corner is not already selected, tap it.
2.
Select the desired pad bank. Use the
Pad Bank
buttons or tap a pad bank shown on the left side of the screen.
3.
To mute or unmute a track
, press the corresponding
pad
or tap it on the screen. Pads for muted tracks are lit
red
. Pads for unmuted tracks are lit
yellow
. Pads for unused tracks do not show any information.
To assign tracks to track groups within this tab
, turn each of the
Q-Link knobs
(when the
Screen Control
Q-Link
button is selected) to assign each of the pads to a track group. The number of each pad’s track group is shown in its
upper-right corner.
Summary of Contents for MPC Touch
Page 1: ...User Guide English Manual Version 2 0 8...
Page 322: ......
