Akai MPC Touch, User Manual

Page: 125 / 322

125
Program Section
The
Program section shows the current program. This section will appear differently depending on the type of
program selected in the Track section above it.
For all program types
while using MIDI tracks , you can do the following:
To edit the name of the program , tap the cursor icon on the right edge of the section. Use the virtual keyboard
that appears to enter a new name, and then tap
Do It
.
To create a new program of the currently selected type , tap the + icon . A new program of the same type will
be created and appended with a number (e.g., Program 002 ).
For all program types
while using audio tracks
, you can do the following:
To change the input source , tap Input Config . This will show or hide the track channel strip. If you are viewing the
audio track channel strip (not the master channel strip), the first field will be automatically selected.
To enter Audio Edit Mode , tap Edit Audio . This is the same as tapping the waveform-and-box icon on the left
edge of the screen.
While viewing drum programs, the
Drum Program field shows the name of the program.
Tap
Warp Samples
to enter the
first Sample
tab in Program Edit Mode immediately (see
Program Edit Mode >
Drum Programs to learn about this).
Tap Assign Samples to enter the Sample Assign tab in the Browser immediately (see Browser to learn about this).
Tap Edit Samples to enter Program Mode in Sample Edit Mode immediately (see Sample Edit Mode > Program
Mode to learn about this). The sample shown will be the one in the top layer of the last pad you pressed.
While viewing keygroup programs, the
Keygroup Program field shows the name of the program.
While viewing clip programs, the
Clip Program field shows the name of the program.
Tap Edit Clips to enter Program Edit Mode, where you can assign samples (clips) to pads, edit each clip, and
configure how each clip plays when launched (see Program Edit Mode > Clip Programs to learn about this).