80
Use the
Time Division
selector to set the quantization value. Events will “snap” to these time divisions on the grid.
The
T
indicates a triplet-based value.
Alternatively, press and hold
Note Repeat
while in Main Mode, and then use the six buttons at the bottom of the screen.
Use the
Swing
field to set the amount of swing from
50%
to
75%
. Swing lets you “shuffle” your beats—from subtle
to extreme.
Use the
Shift Timing
field to shift all events by clock ticks.
Use the
Window
field to set how many events around a quantize value will be quantized. Any events outside this
range will not be quantized; events inside will.
Use the
Strength
field to set how strictly events will be quantized (i.e., shifted toward the quantize value). Lower
values move events a little bit towards the closest quantize value, resulting in a less mechanical feel than a strict
quantization (a higher value).
Use the
Events
selector to set the target range for the
time correction. You can apply the time correction to
All
note events or to just the
Selected
ones.
To select note events to which to apply time correction,
either use the various tools in Grid View or press the
pad with the desired events (while
Hitting Pad Selects
All Events
is set to
On
). You must do this
before
opening the Timing Correct window.
When
Range
is selected, you can define the locations
(
From
and
To
) as well as the pads or keys that will be
quantized.
Summary of Contents for MPC Touch
Page 1: ...User Guide English Manual Version 2 0 8...
Page 322: ......
