Akai MPC Touch, User Manual

Page: 86 / 322

86
To view, load, edit, or clear effects , tap the area under
the Inserts field. This usually appears in a channel strip
(next to a level slider and pan knob ).
When viewing loaded effects, you will see this window:
To select an effect
, use the field for each insert slot. A
window (described below) will appear.
To edit the parameters of a loaded effect
, tap the
pencil icon
next to the insert slot.
To clear the insert slot , tap the trash can icon next to it.
To enable or disable an effect slot
, tap the
On
/
Off
button next to it.
To disable all four effect slots , tap the All On / All Off
button in the upper-right corner. Tap it again to
reactivate the previously active effects.
When selecting an effect, you will see this window:
To move through the list , swipe up or down. Alternatively,
use the
data dial
or
–
/
+
buttons.
To sort or unsort the effects by type or manufacturer ,
tap Type or Manufacturer in the lower-left corner.
To load an effect
, double-tap it. Alternatively, tap
Select
, or press the
center cursor
or
Enter
(MPC X) or
the data dial (MPC Live, MPC Touch).
To cancel , tap Close or anywhere outside the list.
When you edit an effect, you will see this window:
To adjust a parameter , tap and drag its slider.
Alternatively, use the data dial or – / + buttons. To
make finer adjustments , double-tap the pad and
adjust the larger version of the slider that appears.
Tip : Turn the Q-Link knobs to quickly adjust the
corresponding four parameters.
To select another page of parameters , tap the
Parameters – / + buttons at the top of the screen.
To enable or disable the effect
, tap the
On
/
Off
button in the upper-right corner.
To edit parameters for another insert effect on the
same pad, program, etc. , tap a different Insert tab at
the bottom of the screen to select it.
To close the window
, tap
Close
or the upper part of
the screen.