90
To load a keygroup insert effect in the Pad Mixer
:
1.
Use the
Program
field at the top of the screen to select the desired program. Alternatively, use the
Track
field at
the top of the screen to select the desired track—the program it uses will be selected automatically.
2.
Press a
pad
to select its corresponding keygroup, or tap it on the screen. Alternatively, use the
Keygroup
field
below the
Program
field.
Important
: Remember that the effect will be applied to that keygroup only.
3.
Tap the area under
Inserts
, and then use the screen that appears to load or edit effects. Alternatively, double-tap
the desired
pad
on the screen. You could also select one of the four
Insert
tabs at the bottom of the screen, and
then use the
data dial
or
–
/
+
buttons to select an effect immediately.
To load a keygroup insert effect in Program Edit Mode
:
1.
While using the desired program, press the desired
pad
to select its keygroup. Alternatively, use the
Keygroup
field at the top of the screen.
2.
Tap the
Effects
tab in the lower-right corner, and use it to load or edit effects.
Summary of Contents for MPC Touch
Page 1: ...User Guide English Manual Version 2 0 8...
Page 322: ......
