Akai MPC Touch, User Manual

Page: 64 / 322

64
To load a clip into a clip program :
1. Press Main to enter Main Mode.
2. Tap
Edit Clips
to view the pads and clip settings.
3. Press or tap a pad to select it (and play its assigned samples, if any). The pad on the screen will be lit red, and its
number will appear in the
Pad field.
4. Tap the
Sample
field, and then use the
data dial
or
–
/
+
buttons to select a clip. Alternatively, double-tap the
Sample field, and then tap a clip to select it.
To clear the assigned clip from a selected pad
, repeat Step 4, but select
None
.
To assign clips to additional pads , repeat Steps 3–4.
Alternatively, assign clips in a clip program this way :
1. Press
Browse
(MPC X) or
Shift
+
Menu
/
Browse
(MPC Live, MPC Touch) to show the Browser. Find and select a
clip, and then tap Load to load it to the program. Repeat this for any other clips you want to load into the project.
(See Modes > Browser to learn more about using the Browser specifically.)
2. Tap
Sample Assign
to view the pads and project’s sample pool.
3. Tap Assign Mode so it is selected (tapping an item in the sample pool will now assign it automatically to the
current pad).
4. In the
Sample Pool
list, tap a clip to assign it to the pad. Alternatively, use the
data dial
or
–
/
+
buttons to assign
a clip and/or change the assigned clip.
To clear the assigned clip from a selected pad , tap Clear Pad .
To assign clips to additional pads
, repeat Steps 4–5.