INSTRUCTIONS FOR USE
AGS 400-1200 EN
Rev.12/2018
60
Figure 12.10
Legend for Figure 12.9 and Figure 12.10:
1. Hydraulic cylinder of block and damper
2. Damper for setting response of damping
3. Solenoid valve
4. Oscillating lever of spraying equipment
5. Shoulder carrier (cart)
12.4.1.1
FILLING OF HYDRAULIC CYLINDER
Hydraulic cylinder is of closed type and is not connected to hydraulic hoses. Before first installation of
hydraulic cylinder to spraying equipment, procedure of filling on a special device (Figure 12.11)
follows. Oil ATF is used for filling of the hydraulic cylinder.
Figure 12.11
12.4.1.2
PROCEDURE OF FILLING OF HYDRAULIC CYLINDER
•
Before connecting the cylinder, all connections for hydraulic hoses must be facing upwards,
due to air displacement during filling.
•
Connect hydraulic hoses P1 and P2 to cylinder connections.
