background image

HARDI INTERNATIONAL A/S reserve the right to make changes in design or to add new features without any
obligation in relation to implements purchased before or after such changes.

1

LX -

M B / H B

Instruction book

673514-GB-92/03

Contents

Description ................................................................. 2
Operation diagram ..................................................... 4
Connecting the sprayer .............................................. 5
Operating instructions ................................................ 7

Operation of the MB boom .................................... 7
Operation of the HB boom .................................... 8
Operation of trapeze ............................................. 9
Adjustment of the operating unit ......................... 10
Drain valve operation .......................................... 11

Maintenance ............................................................. 12

Lubrication .......................................................... 12
Re-adjustment of the boom ................................. 18
Changing of valves and diaphragms ................... 20
Changing of ball seat in operating unit ................ 22
Off-season storage ............................................. 23

Operational problems ............................................... 24
Technical specifications ........................................... 27
Pictorial symbols ...................................................... 29
Spare parts ............................................................... 30

Summary of Contents for LX-HB Series

















































Reviews: