INSTRUCTIONS FOR USE
AGS 400 - 1200 EN
Rev.12/2018
25
7
DETAILED DESCRIPTION WITH INSTRUCTIONS FOR WORK
The frame of the machine is made from welded steel which contains the reservoir. The lower part
contains an integrated pump, suction filter and flow regulating valves. The pressure regulator is
attached to the front side of the machine and the lifting mechanism with a spray boom is attached to
the back side. The rinsing reservoir and the hand-wash reservoir are installed above the main reservoir.
7.1
MAIN RESERVOIR
The main reservoir is made of polyethylene which is resistant to chemicals. It has rounded edges and
smooth inner walls for easier cleaning. The reservoir has a sloping bottom which assures a complete
emptying of it. There is a sieve with cover mounted on the top of the reservoir. Do not remove the
sieve while filling the reservoir with insecticide or water!
The front side of the reservoir contains a litre scale with a transparent hose attached next to it,
containing a red ball that freely moves (floats) inside it to facilitate the reading of the quantity of
chemical agent in the reservoir.
The cover consists of one part with lever, through which the float valve mechanism for ensuring
aeration and prevention of water leaking from the reservoir on the bottom side. The cover is opened by
turning in clockwise direction and closed in reverse order (see marking on the cover). Reservoir cover
must be closed while working. We recommend using clean water for filling.
When filling the reservoir, never insert the hose through cover into the reservoir or allow contact
between spray and filling hose, as pollution of supply part of the hose may arise. Due to pressure fall,
spray can flow back to filling hose.
Figure 8: Reservoir lid
WARNING: Use protective equipment when handling sprays!
