12
Installation Instructions
Agilent G3437A Side-Mounted Thermal Conductivity Detector
Attach the frame (3rd EPC)
1
Remove the two Torx screws from the top of the module.
Figure 15
Removing the two Torx screws from the module
2
Position the bracket (3rd EPC) on the top of the module with the switching
valve wire passing through the bracket cutout.
3
Attach the bracket (3rd EPC) to the module with the screws.
Figure 16
Attaching the bracket (3rd EPC) to the module
Torx screws
Bracket (3rd EPC)
Screws
Switching valve
routed through cutout
