Agilent G3437A Side-Mounted Thermal Conductivity Detector
Installation Instructions
15
3
Using a 1/8” nut and ferrule, attach the long end of the T-manifold assembly
tubing arm to the bulkhead fitting.
Figure 19
T-manifold assembly installed
Attach the frame (3rd TCD)
Position the frame with the flat surface facing up and the captive screws
below. Align the frame with the holes in the GC and tighten the captive screws.
Figure 20
Frame (3rd TCD) installed
Connection at
bulkhead fitting
Connection at
Reference gas
fitting
Connection at
Makeup gas fitting
Captive screws
Frame (3rd TCD)
