18
Installation Instructions
Agilent G3437A Side-Mounted Thermal Conductivity Detector
3
Thread the cables from the EPC module area behind the pneumatics area to
the third detector flow frame.
4
Bundle the MSD heated zone cable and the communication cable with the
existing cables using the grommet located in the side carrier frame directly
above the EPC module. Refasten the grommet in the cutout.
Figure 24
MSD heated zone cable included in left side grommet
5
Connect the TCD switching valve cable to the switching valve lead on the
EPC module. Connect the other end of the TCD switching valve cable to the
board in the back left connector. See
Figure 25
.
6
Connect the Third DET EPC cable to the communication connector on the
EPC board. See
Figure 25
.
Grommet
MSD heated zone cable
